VitiSort grape sorter removes contaminants

By Jenny Eagle contact

- Last updated on GMT

VitiSort grape sorter.
VitiSort grape sorter.
Key Technology has launched VitiSort, a sorter which includes a mechanical MOG (material other than grape) removal shaker for red wine grapes.

The system removes objects such as insects, skins, raisins, shot berries, stem jacks, petioles, leaves, and other MOG from the product flow, before wine goes into a fermentation tank.

Prior to its launch, Key Technology carried out trials at wineries in North America, Europe, and Australia and the system has been installed at Pepper Bridge Winery and Chateau Ste. Michelle in the US.

Improves quality of the wine

If it’s not removed, MOG will release a bitterness – a harsh tannin – to the wine. Removing the non-grape attributes like this will improve the quality of our wine​,” said Jean-François Pellet, winemaker, Pepper Bridge Winery.

We can receive, sort, and crush three-and-a-half tons of grapes per hour with four workers. One is overseeing the operation, one is feeding product to the system, and two are sorting out leaves before the destemmer​.”

The stainless steel machine can roll into position under a destemmer so that the fruit flows from one machine to the other.

It sorts up to five tons (4.5 metric tons) of red grapes per hour.

Quality control

The technology allows us to use machine-picked grapes and put only berries and pure juice into fermentation. It gives us exceptional quality control to end up with a very rich and dense wine that doesn’t have the tannin from green stems and leaves​,” said Ray McKee, red winemaker, Chateau Ste. Michelle.
 
VitiSort starts with a vibratory conveyor belt that shakes the grapes to separate the MOG, which fall through a slot onto a sloped surface for removal.

As the grapes fall from the end of the vibratory conveyor into the sorter a camera inspects each fruit.

A drip tray keeps juice out of the camera line-of-sight and the sorter analyses the images, comparing each object to previously defined accept/reject standards.

Air jet ejector

When the unwanted objects are identified, the sorter activates an ejector system, which is made up of air jets that remove it from the product stream.

The grapes are then discharged from the sorter into a trough or screw conveyor to take them to the fermentation tank.
 
The MOG shaker is very effective at removing insects and shot berries, which reduces the load on the optical sorter and improves its performance. The optical sorter takes out stem jacks and other MOG​,” added Pellet.
 
Key says the VitiSort comes with a color touchscreen control panel where the winemaker can adjust the sort parameters to remove more or less MOG to meet requirements and the product settings can be stored and retrieved.

Related news

Related products

High Pressure Processing  - HPP

High Pressure Processing - HPP

Accurate filing of high value FMCG in glass jars | 21-Sep-2017 | Technical / White Paper

HPP offers opportunities for product innovation and extended shelf life. HPP is a proven all-natural technique that preserves the vitamins, taste and texture...

A Guide to Product Recovery for Beverage Manufacturers

A Guide to Product Recovery for Beverage Manufacturers

HPS Product Recovery Solutions | 11-Sep-2017 | Technical / White Paper

Product recovery (“pigging”) is in wide use in the beverage industry. It gives a high return on investment with rapid payback.Pigging recovers up to 99.5%...

Survey Report: State of the Beverage Industry 2017

Survey Report: State of the Beverage Industry 2017

William Reed | 15-Jun-2017 | Application Note

In May 2017, BeverageDaily.com conducted its inaugural ‘state of the industry’ survey on its user base of beverage industry professionals. The key objective...

Related suppliers

Follow us

Featured Events

View more

Products

View more

Webinars